top of page
News
Update-11: GeckoWiper🦎 Shipping underway 🚀
🚀 Shipping is underway! 📦
Update-10: Final Assembly 🔧 & Shipment Update!
Date: 21.Feb 2025
Great news—we've made it! 🎉
🔧 1. First Assemblies Finished
✅ The first GeckoWiper🦎 units have been successfully assembled and packed today
🔧 2. Shipment to Start Next Week
✅ Worldwide Shipments are officially set to begin next week for Kickstarter backers! Purchases after Kickstarter are handled with shipment start by begin of March, as scheduled.
Great news—we've made it! 🎉
🔧 1. First Assemblies Finished
✅ The first GeckoWiper🦎 units have been successfully assembled and packed today
🔧 2. Shipment to Start Next Week
✅ Worldwide Shipments are officially set to begin next week for Kickstarter backers! Purchases after Kickstarter are handled with shipment start by begin of March, as scheduled.
Update-9: Electric Drive Train Complete 🚀 & Final Assembly Begins Feb 17! 🦎🔧
Exciting news—this is your shipment month! 🎉 As promised, we're on track to ship all GeckoWiper 🦎 units by the end of February. Here's where things stand:
✅ 1. Electric Drive Train – Fully Assembled!
All motors, batteries, and PCBAs are completed and ready to go. Your GeckoWiper’s power system is fully assembled!
🏗 2. Plastic Housing – Arriving by Feb 17
The plastic injection process was more challenging than expected, but we’ve successfully resolved mold issues. Below an image of plastic injection samples approved for system integration (interface checks). Mass production is now underway, and all plastic housings will be ready for system integration by Feb 17.
🔧 3. Final Assembly & Quality Checks
Starting Feb 17, we’ll begin the final assembly, where the electric drivetrain is integrated in its mechanical housing! This will be followed by thorough quality inspections to ensure every unit meets our standards. We’ll also share photos of the production process as soon as available.
📦 4. Shipping Schedule
We’ll begin shipping from Feb 24, with the goal of having all units shipped by the end of the month. This means your GeckoWiper 🦎 should be in your hands and ready for installation by mid-March!
Thanks for being part of this journey—we can’t wait for you to receive your GeckoWiper 🦎! Stay tuned for more updates, and have an amazing February!
Cheers,
Robert & The GeckoWiper 🦎 Team
✅ 1. Electric Drive Train – Fully Assembled!
All motors, batteries, and PCBAs are completed and ready to go. Your GeckoWiper’s power system is fully assembled!
🏗 2. Plastic Housing – Arriving by Feb 17
The plastic injection process was more challenging than expected, but we’ve successfully resolved mold issues. Below an image of plastic injection samples approved for system integration (interface checks). Mass production is now underway, and all plastic housings will be ready for system integration by Feb 17.
🔧 3. Final Assembly & Quality Checks
Starting Feb 17, we’ll begin the final assembly, where the electric drivetrain is integrated in its mechanical housing! This will be followed by thorough quality inspections to ensure every unit meets our standards. We’ll also share photos of the production process as soon as available.
📦 4. Shipping Schedule
We’ll begin shipping from Feb 24, with the goal of having all units shipped by the end of the month. This means your GeckoWiper 🦎 should be in your hands and ready for installation by mid-March!
Thanks for being part of this journey—we can’t wait for you to receive your GeckoWiper 🦎! Stay tuned for more updates, and have an amazing February!
Cheers,
Robert & The GeckoWiper 🦎 Team
Update-8b: Certification Passed - Mass Production Progress – Assembly Starting Soon !🦎
1.) Hardware arrival
All electrical hardware components are inhouse & inspected & ready for assembly
All mechanical hardware is also inhouse & inspected, apart from the main injection housing (details next point)
2.) Injection parts
All injection steel moulds are finished
3 of 5 GeckoWiper injection plastic parts are available for sample approval & geometrical tolerance / shrinkage check. Currently matt mould surface treatment is added
The GeckoWiper plastic housing, coming with a complex steel mould, will provide plastic approval samples by end of the upcoming week.
3.) Mass production of electronics, performance test stand
All electronics, PCBA are manufactured & programmed & tested on dedicated test stand
The test stand is part of quality approval prior assembly into the GeckoWiper mechanics.
4.) Certification
GeckoWiper has successfully passed all required certifications and is now officially compliant with FCC, CE, IC, ROHS, and REACH standards, ensuring global acceptance.
A Peek Behind the Scenes: Achieving this milestone required multiple GeckoWiper to prepare & submit for dismount & even destructive testing. The journey came with a 30-page documentation for submission needs, exchanging over 80 emails, and dedicating two months of work. But we did it—and it’s all thanks to your incredible support that made this journey possible.
5.) Summary
Certification: finished
Sourcing finished, part based incoming inspection finished & parts inhouse for assembly
Injection parts: Last GeckoWiper plastic injection housing to receive next week. Updating for injection mold from the 3D print design proved to be more complex than anticipated, but it’s now complete & mould finished for sample release.
Assembly Line: Set to begin in early February, with the goal of releasing and shipping all 300 units worldwide by the end of February.
All electrical hardware components are inhouse & inspected & ready for assembly
All mechanical hardware is also inhouse & inspected, apart from the main injection housing (details next point)
2.) Injection parts
All injection steel moulds are finished
3 of 5 GeckoWiper injection plastic parts are available for sample approval & geometrical tolerance / shrinkage check. Currently matt mould surface treatment is added
The GeckoWiper plastic housing, coming with a complex steel mould, will provide plastic approval samples by end of the upcoming week.
3.) Mass production of electronics, performance test stand
All electronics, PCBA are manufactured & programmed & tested on dedicated test stand
The test stand is part of quality approval prior assembly into the GeckoWiper mechanics.
4.) Certification
GeckoWiper has successfully passed all required certifications and is now officially compliant with FCC, CE, IC, ROHS, and REACH standards, ensuring global acceptance.
A Peek Behind the Scenes: Achieving this milestone required multiple GeckoWiper to prepare & submit for dismount & even destructive testing. The journey came with a 30-page documentation for submission needs, exchanging over 80 emails, and dedicating two months of work. But we did it—and it’s all thanks to your incredible support that made this journey possible.
5.) Summary
Certification: finished
Sourcing finished, part based incoming inspection finished & parts inhouse for assembly
Injection parts: Last GeckoWiper plastic injection housing to receive next week. Updating for injection mold from the 3D print design proved to be more complex than anticipated, but it’s now complete & mould finished for sample release.
Assembly Line: Set to begin in early February, with the goal of releasing and shipping all 300 units worldwide by the end of February.
Update-8: KIA EV6 approved for GeckoWiper🦎
GeckoWiper is approved for usage on KIA EV6, pre-order possible via link.
Update-7: Glow in Dark Remote & Certification & boxing 🦎
Date: 07.Dez 2024
1.) Remote Key, Glow in Dark:
New feature coming with your GeckoWiper 🦎, a glow in dark frame, which uses daylight to charge itself & release low glow during night. This will support your experience during night driving to locate your key to activate your GeckoWiper 🦎.
2.) Certification FCC / CE
Full GeckoWiper 🦎 CE & FCC certification ongoing, scheduled to finish in two weeks from now, by 21. Dez. An image below of certification testing dedicated GeckoWipers
3.) Mass production boxing
Transportation boxes trials finished, packing concept frozen & mass delivery in 5 days
1.) Remote Key, Glow in Dark:
New feature coming with your GeckoWiper 🦎, a glow in dark frame, which uses daylight to charge itself & release low glow during night. This will support your experience during night driving to locate your key to activate your GeckoWiper 🦎.
2.) Certification FCC / CE
Full GeckoWiper 🦎 CE & FCC certification ongoing, scheduled to finish in two weeks from now, by 21. Dez. An image below of certification testing dedicated GeckoWipers
3.) Mass production boxing
Transportation boxes trials finished, packing concept frozen & mass delivery in 5 days
Update-6: First injection parts out
Date: 23.Nov 2024
First injection part milestone reached
First injection part milestone reached
Update-5: Battery Certification Milestone Achieved 🚀
Date: 20.Nov 2024
Hello everyone,
I’m excited to share a major milestone with you all. As mentioned during Update-2, today, we’ve successfully passed the battery certification for GeckoWiper🦎! This is a critical achievement and an essential requirement for the ongoing certification of the GeckoWiper🦎 system.
For those interested in the details, the battery certification process involved:
Short circuit tests
Overcharge tests
Vibration tests
Shock tests
Thermal abuse at 130°C
Cell crush tests (no fire or explosion)
Over-discharge tests
Thank you for your continued support, and I wish you all a great day!
Best regards,
Robert
Hello everyone,
I’m excited to share a major milestone with you all. As mentioned during Update-2, today, we’ve successfully passed the battery certification for GeckoWiper🦎! This is a critical achievement and an essential requirement for the ongoing certification of the GeckoWiper🦎 system.
For those interested in the details, the battery certification process involved:
Short circuit tests
Overcharge tests
Vibration tests
Shock tests
Thermal abuse at 130°C
Cell crush tests (no fire or explosion)
Over-discharge tests
Thank you for your continued support, and I wish you all a great day!
Best regards,
Robert
Update-4: Charging now possible while mounted
Date: 06.Nov 2024
As part of the transition from 3D printing to injection molding, USB-C charging will now be possible while the GeckoWiper🦎 remains mounted, using exemplary a power bank or a long USB-C cable.
As part of the transition from 3D printing to injection molding, USB-C charging will now be possible while the GeckoWiper🦎 remains mounted, using exemplary a power bank or a long USB-C cable.
Update-3: CNC Mould production
Date: 05.Nov 2024
Please find the 2nd of 5 mould currently in cnc production. Current mould shown is the motor arm.
Please find the 2nd of 5 mould currently in cnc production. Current mould shown is the motor arm.
Update-2: Progress Certification
Date: 05.Nov 2024
Certification Update: We’re making steady progress!
The battery certification, a key milestone, is on track to be completed in two weeks.
Meanwhile, the full system certification process has been initiated and is currently underway.
Attached, a short video showcasing the first laser marking trials on protos.
Certification Update: We’re making steady progress!
The battery certification, a key milestone, is on track to be completed in two weeks.
Meanwhile, the full system certification process has been initiated and is currently underway.
Attached, a short video showcasing the first laser marking trials on protos.
Update-1: Progress Mould Making, 1st of 5-moulds
Date: 28.Oct 2024
Please find below first CNC milling for the handle part of GeckoWiper (touching later the glass inside the car).
Please find below first CNC milling for the handle part of GeckoWiper (touching later the glass inside the car).
>300 GeckoWiper 🦎 Backers reached
Date: 25.10.204
🚀 Thank you all for your generous trust and support in the GeckoWiper development and mass scaling.
The Backer Milestone of 300 Backers was reached , revealing a storage bag for your GeckoWiper unit! 🚀
Several Beta Tester used GeckoWiper in a on/off mounting principle and wished for a neat bag to have all together.
Here it is, small video of a GeckoWiper proto being packed in such a cotton bag.
Technical updates:
-Several steel molds for injection moulding have already been ordered. Will share images as soon as available
-Parallel, certification process is ongoing
Thank you so much for your support,
🚀 Thank you all for your generous trust and support in the GeckoWiper development and mass scaling.
The Backer Milestone of 300 Backers was reached , revealing a storage bag for your GeckoWiper unit! 🚀
Several Beta Tester used GeckoWiper in a on/off mounting principle and wished for a neat bag to have all together.
Here it is, small video of a GeckoWiper proto being packed in such a cotton bag.
Technical updates:
-Several steel molds for injection moulding have already been ordered. Will share images as soon as available
-Parallel, certification process is ongoing
Thank you so much for your support,
Kickstarter successful finished :-)
Date: 25.10.204
Kickstarter on GeckoWiper successful finished: See link https://www.kickstarter.com/projects/geckowiper/geckowiper-hyundai-ioniq-5-removable-rear-window-wiper
Kickstarter on GeckoWiper successful finished: See link https://www.kickstarter.com/projects/geckowiper/geckowiper-hyundai-ioniq-5-removable-rear-window-wiper
Date: 25.09.204
Kickstarter on GeckoWiper launched:
Check-out Kickstarter Campaign via https://www.kickstarter.com/projects/geckowiper/geckowiper-hyundai-ioniq-5-removable-rear-window-wiper
Kickstarter on GeckoWiper launched:
Check-out Kickstarter Campaign via https://www.kickstarter.com/projects/geckowiper/geckowiper-hyundai-ioniq-5-removable-rear-window-wiper
bottom of page